Register for a New EasyOrder Form

Mon April 9, 2018Written by laserlite51

Similar posts

“Supply Problem” message on HP M280 and M281 Printers

Tue November 24, 2020

If your HP Color Laserjet Pro MFP M280 or M281 printer has stopped printing and a “Supply Problem” message has appeared on the display, HP automatically upgraded your printer firmware. This upgrade includes code that stops the printer from recognizing present compatible toner cartridges. Follow the instructions below to downgrade your firmware and bring your […]

Turn OFF Automatic Firmware Updates…

Thu October 22, 2020

…to Keep Compatible Ink Cartridges Functioning in Your Printer More printer manufacturers are using firmware updates to block the use of compatible ink cartridges. This is great if you want to push people to buy OEM inks. This is not so great if you don’t want to pay high OEM prices. So, is there a […]

No Chips Available for the Compatible HP CF289 Toner Cartridges

Thu January 2, 2020

Solution: Reuse the Old Chips! Presently, the compatible HP CF289A and CF289X do not come with chips. These compatible toners will not automatically work when installed in a printer unless you remove the chip from the previously-used toner and place it on the new compatible cartridge. Reusing chips from previous toners makes sure that the […]

No Comments Yet

You must be logged in to post a comment.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

How do Laser Printers Work?

Have you ever wondered how an electronic image displayed on your computer screen is copied near perfectly onto a piece of paper within a matter of minutes? (Sometimes within a matter of seconds!) How does this miracle happen? How do laser printers actually work?

Great question! Following is a simple step-by-step explanation, from the blank page to a final work of printed art:

Step 1) Electronic data from the computer is sent to an electronic circuit inside the laser printer. There, the data is deciphered into what will become an image on a sheet of paper.

Step 2) An electronic circuit activates a corona wire or a PCR (primary charge roller) next to a cylindrical photoreceptor drum. If your printer uses a corona wire, it gives a positive (+) initial charge to the surface of the drum. If your printer uses a PCR, it gives a negative (-) initial charge to the surface of the drum.

Step 3) Meanwhile, the electronic circuit activates a laser beam which bounces off a moving mirror to essentially ‘draw’ an image onto the drum’s surface. This is done by the laser beam hitting the drum, erasing the existing charge in spots and creating the opposite charge in those same spots where toner will eventually cling. Areas on the drum meant to remain white on the paper keep their initial charge.

Step 4) A developer roller or ink roller that is in contact with the drum, coats the drum with toner (powdered ink). The toner holds a charge that is opposite to the charge of the image on the drum; therefore, the toner clings to the areas on the drum altered by the laser beam. This results in a toner image created on the drum.

Step 5) When a sheet of paper passes near the drum, the charge on the paper attracts the toner particles clinging to the drum. (Again, opposite charges attract.) The image is transferred from the drum to the paper, but the toner merely clings or ‘rests’ on the page at this point.

Step 6) Lastly, the page passes through a fuser unit, a pair of very hot rollers. Heat and pressure from these rollers fuse the toner image permanently onto the page. And viola! A final printout exits the printer!

__________

Printer Maintenance plus Ink & Toner Cartridges